SPECIFICATION Nut feeder Bolt feeder NF Standard NF21 SKY vacuum Chuck Power supply AC100V Frequency For 60Hz and 50Hz Power consumption 500VA — — 300VA — — — — 20W — — — — Air pressure used 0.3 - 0.4MPa — — 0.4 - 0.5MPa — — — Bowl size φ260 — φ300 — — — — φ350 — — Drive method Vibration method — Motor method — — — — Nut size M4 — — — M5, M6, M8, M10 — — M12, 7/16 M14 — — — Nut used Square — — Hexagon — — — T shape, diamond shape, with lib — — — Nut with a bag, color — — — Hopper capacity 6L — — — — 9L — — 10L — — — — Drive method Cylinder drive method — Vibration method — One's weight fall method — — — — Supply chute length For air pressure supply 2m (MAX 10M) — — For air pressure supply 3m (MAX 10M) — — — One's weight fall method 0.5m — — — — Equipment weight Body Approximately 90kg — — Body Approximately 80kg — — — — Body Approximately 10kg — — — — Supply method Electromagnetic absorption method — — Skewer method — — Electrode push method — — — — Chuck method — — — — Vacuum absorption method — — — Nut positioning Nut direction control type *Square, Diamond, T-shaped — — Supply angle Nut: 0° - 90° *1   — Nut: 20° - 40°     Bolt: 45° (Can be horizontal) *2 — — — — Bolt: 40° — — — — Supply stroke Standard type 150st, 200st, 250st Standard type 300st — — Supply capacity Nut: Approx. 20 to 50 pcs. /minute — — Bolt: Approx. 20 to 30 pcs. /minute — — — Overseas standard compatibility CE type — CSA type — UL type Bolt size M4 - M12 — — — Bolt shape T-shaped, short under head — — — — Bolt under head size 15 - 40mm — — — Bolt under head size 8 - 60mm — — — — *1: Option: This is the case of electromagnetic absorption with an additional table. *2: Standard angle is 45° and can be adjusted according to your request. ↑Go to top